Toronto and the Nikon FE2 | Bill Smith

I’m going to be up front, there are times I have to agree with the late Anthony Bourdain: Toronto isn’t a pretty city, like, say, London, or Paris. Its charm is on the ground, in the streets, and most importantly in the neighbourhoods and park systems providing a never ending wealth of photographic opportunities. 

Skyline Riverdale Park

So you’re planning to visit Toronto: if you have any leeway in timing take a pass in the winter and head up to Quebec City instead, they have winter charm cornered. Spring Summer and Autumn are much better times to visit. I’ve told friends we pretty much share Chicago’s climate minus the snowfall. In fact in some ways we’re a Chicago, tilted sideways, and with exponentially less gun crime. If you road tripped up from the US, just park the car where you are staying: Toronto rush hour isn’t for the weak, especially on the Gardiner Expressway, Don Valley Parkway, or the 401. Buy a PRESTO Card which you can buy at any GO Train Station, TTC Subway Station and Shoppers Drug Mart, load it up with money. You can use PRESTO on any public transit system in The Greater Toronto Hamilton Region including GO Transit. Fares will vary on each system. 

Friday Morning on the DVP Northbound

Logistics are out of the way: we’re downtown, it’s morning and we will be headed east on the 504b Street Car, and enjoying the ride through Toronto’s downtown core, crossing the Don Valley and up Broadview Ave. We’re not going all the way up to Broadview Subway Station on Danforth. Get off at Withrow Avenue, why here? Across the street is Riverdale Park, and there’s a reason why we start here, there’s a great skyline view of downtown Toronto. The other reason, and when I plan photowalks, is they have to start with decent coffee, in this The Rooster Coffee House on Broadview. 

The Rooster in the Shade

From here you can go in multiple directions, like deeper into the east end through Chinatown East and down into Leslieville, or, go down into the valley and take the pedestrian overpass into Cabbagetown. This is just a few examples with just one starting point; you can even stay downtown and wander around, or go down to the harbour. I do strongly recommend, if you’re coming to Toronto, connect with one of the local film photography communities like The Toronto Film Shooters Facebook Group; they are filled with local knowledge. 

 Now that’s my town.  For your consideration, the one of many cameras I own that I take with me on my urban adventures is the Nikon FE2. At first glance it looks like its mechanical stablemate of the FM2, but under the hood the FE2 is a different camera. 

Produced between 1983 and 1987 as a replacement model for the FE, the FE2 was marketed to advanced amateurs during a very dynamic time in camera evolution. Unlike the FA stablemate, the FE2 was quite conservative in features, with just aperture priority, bulb to 1/4000 shutter speed, and a mechanical 1/250, and that’s it. Under the skin there were a lot of shared electronics, particularly with the TTL Off The Plane Flash metering system. 

Unlike the Canon AE-1P and Minolta X-700, the FE2 was all metal construction built to take a ton of abuse. Of course, that reflects in the original selling price. Nikon did respectably well with the FE2 but by the late 1980s with autofocus bodies being introduced by all the major camera brands, Nikon streamlined the product line in favour of cutting edge technology. 

That’s the history lesson; what’s the Nikon FE2 like to work with? 

 Short answer: much like the FE but with higher shutter speeds. To expand, the FE2 has a great match needle display which is the opposite of the FM2, which was LED, or the FA, which is LCD like the F3. Nikon was shrewd to have an auto exposure capable camera for advanced shooters who don’t need multiple modes, which is pretty much me. 

I love this camera for multiple assignments be it in the city or out hiking, and it would make a decent camera for travelling. Batteries shouldn’t be an issue as Energizer 357’s and S76’s are pretty much common everywhere, but it’s wise to pack some spares just in case. 

The next question is, should I get one? 

Well, that depends. If you are a Nikon shooter with with a large stable of Ai, Ais and even AF-D Nikkor lenses, I would whole-heartedly say yes, the FE2 would make a great addition to the camera bag. If there’s one Achilles heal, you can’t use Pre-Ai Nikkor lenses on the FE2 like you can with the FE, and meter stop down. If you try, it will end in tears, regret, and a repair bill along with a stern glance of condescension from your go-to repair tech for being dumb. So yeah, don’t put Pre Ai lenses on the FE2, the same goes with the FM2 and the FA.

To wrap this up: Toronto is a fun place to visit, in the spring, summer or fall. There are tons of places to photograph and explore, and do start your photowalk with a decent coffee and end off with beer. The Nikon FE2 is a great camera to add to your kit if you’re a Nikon shooter and is one of my go to bodies in my Nikon kit.


Connect

Bill Smith, an Ontario-based film photographer, specializes in landscape, street, architecture and portraiture. Follow Bill on Twitter or Instagram.

Special K Pentax | Bill Smith

Everyone knows the Pentax K1000, a camera with a long history going from the mid 1970s until the end of the 1990s. We’re not talking about that. I want to show you three cameras in the Pentax line up though with a short history from 1975 to 1978: we’re talking about the KM, KX, and K2. Three cameras people don’t look at as much but they should, K1000’s are getting silly expensive for what they are, and as my local camera pusher coins run into the dirt like a Ford Crown Victoria police cruiser turned taxi cab. Before we get there, we’ve got to talk a bit about the K mount.

By the late 1960s, Asahi Pentax was selling cargo ship loads of Spotmatics and M-42 Takumar lenses to the world, but the lens mount was getting long in the tooth since competitors went to breech lock (Canon) and bayonet mount (Nikon and Minolta). Another Camera manufacturer, Germany’s Zeiss Ikon, was looking for a design and manufacturing partner; a collaboration on the K-mount was struck with Asahi Optical. In a parallel universe somewhere there would be K mount bodies looking like the Pentax KM/KX/K2 with either the Zeiss Ikon or Contax brand name on them. That didn’t happen; by 1975 Zeiss Ikon made the decision to leave the camera manufacturing business just to focus on optics. Asahi Pentax was left with a new lens mount and they decided to make it open source so companies like Chinon and Ricoh could piggy back on. The K mount is still used today by Pentax in their line of DSLRs.

The Pentax KM, KX and K2 were a continuation and improvement of the Spotmatic and the Spotmatic ESII. Cosmetically at a distance, if you squint a bit, they look the same, the ergonomic layouts are similar. All of them take 1.5v SR44/Energizer 357 batteries which are super easy to find.

Let’s start with the KM, it was the entry level model, note the K1000 didn’t arrive until a year later as the student and budget special. The KM is for all intents and purposes a Spotmatic F with open aperture metering (the lens hood is the on/off switch) minus the shutter lock and of course with the K mount. If you look through the prism, you’re met with the same meter reading as Spotmatic F or the K1000. This is a fun camera to use, pretty low tech and light years ahead, and ironically cheaper than the K1000.

Stepping up to a new level, the KX had an upgraded light meter you can turn on and off just like a Nikon FM or FE with the film advance meter. The Meter read out is just like the Nikon FE and Nikkormat EL. One more added feature was an aperture readout in the viewfinder just like Nikon Ai cameras released a few short years later. Pentax got it right with this camera. If you are looking for the best of all possible worlds, I would just say get KX, or two (one for colour the other for black and white) and be done with it.

The top of the line K2 is altogether a different animal. Unlike the KM and KX, it had a vertical electronically controlled copal shutter with a flash sync of 1/125, it has the same meter display as the KX along with the on/off switch being the film advance lever. The K2 is light years ahead of the ESII with full manual control of all speeds from B to 1/1000 when you’re not in aperture priority mode. Two years into the product cycle Pentax introduced the K2DMD which had a motor drive and was positioned for advanced and professional shooters. The K2DMD was made to about 1980, ultimately being replaced by the LX. The one achilles heal for this camera, aside from the electronics being over 40 years old, is the film speed and exposure compensation being on the lens mount: they can get pretty stiff over time and can be a be a fingernail breaking exercise if you’re not careful.

All three cameras were discontinued in late 1977/early1978 to be replaced by the super compact MX and ME(Super); the K2DMD soldiered on for two more years. The K1000 outlived them all by having its production moved to Hong Kong and later mainland China.

The KM/KX/K2 are fun to shoot with, adhering to Asahi Pentax’s “Just Hold One” branding. If you want the K1000 experience but want depth of preview, mirror lock up, and a self timer, the KM is your camera. The KX is the big step up, and the one I recommend if you want the upgraded meter, but are leery of the K2’s electronics.

Now the K2 is an interesting camera. In fact, if you don’t have the budget for an LX, I would take a good long look at this one. Yes the electronics are up there in age, but they are light years ahead of the Electro Spotmatics which are by and large paperweights now. The K2DMD is fetching K1000 prices as it is a sought after camera and the last from the Spotmatic design ethos from a decade before, and it had a motor drive.

Budget wise all three bodies can be found at camera shows for around $100 US or CAD. I would budget money for a CLA, especially for the K2. As mentioned above, the K2DMD is worth a lot more, in some cases between $200 to $300. Make sure the motor drive works.

Now we talked about the camera bodies so much: the SMC Pentax K and SMC Pentax M K mount lenses are just as much amazing glass as the Super (Multi Coated) Takumars. The SMC Pentax K mount lenses were produced between 1975 and 1978, and were 52mm diameter for lens filter and hoods. The SMC Pentax M lenses were launched the same time as the MX and ME(Super), had a 49mm diameter, and are more plentiful out there in the second hand market due to the longer production run. As for what’s best, my recommendation is read the Pentax Forums reviews. Let’s just say the fans are very detailed in their reviews for OEM and aftermarket lenses and you won’t be steered wrong.

So there you have it, an introduction to what I call the Special K Pentax line up: a trio of below the radar SLRs only made for a few short years that were overshadowed by the budget model.


Connect

Bill Smith, an Ontario-based film photographer, specializes in landscape, street, architecture and portraiture. Follow Bill on Twitter or Instagram.

The Curious Jupiter 12 | Colton Allen

As there numerous reviews out there (both good and bad) of the Soviet made Jupiter-12 lens, I thought I might share some of the experiences I’ve had with mine, instead of trying to do a more technical lens review.

About 5 years ago, on a whim, I bought a beautiful 1957 Zorki 4 rangefinder. At the time (and still now) I prefer using a 35mm focal length over the more common 50mm. I had read some good things about the Jupiter-12 35/2.8, so within a few months of buying the Zorki, I started looking for a L39 (Leica Thread Mount) copy of the Soviet made Zeiss Biogon copy.

Rightly or wrongly, Soviet made camera equipment has received very mixed opinions. More often than not, it doesn’t enjoy a great reputation. People will often refer to buying Soviet made camera gear as playing “Russian Roulette”. I may just be lucky, but my experiences have all been generally positive. Shortly after I started my search, I found a rather sad looking 1956 KMZ made silver Jupiter-12, but the seller was in the US (which meant quicker shipping and easier returns) and the listing claimed it was working well. I decided to buy it, and within a week I was out shooting a test roll with it. Initially, I have to admit that I was rather underwhelmed with the lens, and my early results weren’t that good. The lens seemed to work okay, I just didn’t really like what I got from it. I really think that it takes 3 or 4 rolls of film, and a bit of time to get comfortable with a new lens or camera before it starts to gel with you. At the time though, I hadn’t really gotten into using rangefinder cameras, and so the Zorki and Jupiter-12 sat in my camera cabinet, unused for a few years.

In the fall of 2017, I pulled the Zorki out (see my article here) and started using it again. This time, the camera and the Jupiter-12 just clicked with me, and I started getting results I was really happy with. All throughout 2018, the Jupiter-12 was nearly my most used lens, and I made some of my best photos with it.

Physically, the Jupiter-12 is a strange lens. As mentioned above, it’s a copy of the prewar Zeiss Biogon 3.5cm f/2.8, which is a non-retrofocus wide-angle lens. Because of non-retrofocus design, the front element is fairly small and sits deep within the lens barrel, while the rear element is rather large and protrudes way out the back of the lens. The rear element comes out so far that there are some cameras (some Voigtlander Bessa R series cameras) you can’t use the lens on because the rear element will impede the shutter curtains. Some of the Canon rangefinder cameras have light baffles inside the lens mount that the Jupiter-12 will run into if mounted. Another quirk with the Jupiter-12 is that the aperture is adjusted by turning the filter thread and the aperture values are marked on the inside front near the front element.

The Jupiter-12 was made in both L39 mount and Kiev/Contax mount. Optically they are (I believe) the same. The Kiev/Contax mount version should fit all Kiev rangefinder cameras, but I think will not fit the postwar Contax cameras. I believe the Kiev mount Jupiter-12 will also fit some of the Nikon rangefinder cameras, but the lens mount might scratch the front of the camera when it’s mounted.

If you’re using a Leica screwmount camera (or even a Leica M body) and you’re looking for an affordable 35mm lens, I highly recommend finding yourself a Jupiter-12.

This photograph, and the previous 4, were made with the Canon 7 and Jupiter 12


Connect

Film photographer, Colton Allen is based in Oregon. Connect with him on Flickr, Instagram, and Facebook. You can also see more of his work right here on our website.